Vortex Switchview Throw Lever SV-2
Vortex Switchview Throw Lever SV-2
Vortex Switchview Throw Lever SV-2
Vortex Switchview Throw Lever SV-2
Vortex

Vortex Switchview Throw Lever SV-2

ADJUST YOUR POWER – FAST AND EASY! Maximize the efficiency of magnification transitions with fluid precision using Vortex’s SV-2 Switchview™ Throw Lever.

$59.99
/
  • In stock, ready to ship
  • Backordered, shipping soon

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Maximize the efficiency of magnification transitions with fluid precision using Vortex's Switchview Throw Lever. The Switchview attaches and detaches easily to the magnification ring. Constructed of skeletonized, lightweight hard-anodized aluminum, this is one tough accessory that will serve you well.

Included in the Box

  • 2mm Screw
  • 2mm Hex Wrench

Compatibility

Compatible with select riflescope magnification rings with a diameter of 1.739 inches / 44 mm

  • Razor HD riflescopes with a rubber magnification ring
  • Viper HD models
  • Viper riflescopes with a metal magnification ring (PST Gen I, HST, HS LR, HS models)
  • Strike Eagle Gen I 1-8x24
  • Viper XBR crossbow scope

Weight 0.4 oz

Installation Guide

 

  1. Properly mount your riflescope and have the Switchview™ ring, lever screw, wrench, and some lubricant available.
  2. Find the center of travel on your riflescope’s magnification adjustment ring and place a small mark at this point as a reference for positioning (Step 6).
  3. Apply one drop of lubricant to the ball of the Switchview™ ring (Figure 1). 
  4. Slide the Switchview™ ring apart — just far enough to get it over the eyepiece and/or around the illumination knob.
  5. Carefully insert the ball of the Switchview™ ring into the socket of the lever by gently working the lever onto the lubricated ball (Figure 2).
    Note: Precise tolerances ensure the ball and socket fit together very tight.
  6. Insert the 2mm Screw through the unthreaded hole in the lever and into the ring (Figure 3) and tighten only until snug and doesn’t slip when rotated. If you use a torque wrench, tighten to 2.2 inch-pounds. When properly installed, a gap will remain between the two parts at the screw connection.
    Caution: Do not over-tighten. Over-tightening may cause damage to the Switchview™ and/or riflescope.
  7. Test to ensure the Switchview™ lever is in the best position for you. To adjust, simply loosen the screw and reposition the lever to a more comfortable position. Then, retighten the screw and test the new position.
    Attention: Ensure firearm is completely unloaded before making any modification. Unload, check inside the chamber, and remove any
    ammunition from the area.

INCLUDED: SV-2 Throw Lever, 42mm Screw, 42mm Hex Wrench


Complete your kit...

Shipping & Returns

We typically fulfill orders by the following business day, though in some cases it may take up to 72 business hours. Orders are shipped via UPS and USPS.

Please note that shipping times shown at checkout are estimates only, and delays can occur once a package is in transit. If you require a guaranteed delivery date, be sure to select a shipping option that includes a stated timeframe (e.g., Next Day Air or 2nd Day Air).

For any special shipping preference requests, please contact us at info@gearfool.com or call (435) 263-0207 prior to placing your order.

We do not ship internationally at this time.

See our full shipping and return policy here.

We offer a “30-Day Money Back Guarantee" for any product that (1) aligns with this Return & Exchange Policy and (2) wasn't already discontinued at the time of purchase. You have 30 days from the date of purchase to return a product for a full refund or exchange, granted the product aligns with this Return & Exchange Policy. Returned product must still be in a new and resellable condition, free of any damage or defect.

See our full return and exchange policy or start a return/exchange here.